Blog

How do I know if my flat roof needs replacing?

flat black roof

How to know if its time for flat roof replacement

Commercial and industrial structures are known for having a flat roof. Why? Because of money and safety. Building a sloped roof on a residential structure is less dangerous and isn’t as costly as it would be a on a commercial or industrial structure. 

In fact, in many ways, a pitched roof a large commercial or industrial structure is almost impossible. Of course, with the technology and tools available today, it is possible if the owner of the building has the budget and a contractor willing to do the work. Although, flat roofing experts recommend against pitched or sloped roofing on a large structure due to the future issue possibilities. 

Seriously though, are flat roofs really flat? No, a flat roof is not completely flat. It is common sense that water can’t drain from a flat surface, and when that flat surface is a flat roof, the trouble it could create for the structure supporting it is monumental. There is a low slope to the roof, as little as ¼ an inch and as much as half an inch per foot. 

It is because of the low slope to a flat roof, there must be adequate drainage and that flat roofs are made of right roofing material is a must to provide the watertight surface needed. So, is a flat roof worth the concern and common question of “Do flat roofs always leak?”. We’ll answer that by stating that flat roofs do not ‘always’ leak, but yes, the are prone to leak. 

The primary reason that a flat roof is prone to leaking is because they aren’t able to shed the water like a sloped roof, key reason why drainage installed is a must. With the ever-so-slight slope, as we described above, a flat roof properly constructed should have minimal to no chance of leaking. 

The inspection by a roofing contractor or insurance adjuster can advise the owner of a flat roof building if the roof was built correctly or not.  Poor construction of a flat roof is the most common reason for a leaking roof. This will happen with the original contractor is running tight on the budget and they cut corners, or they made a mistake in the construction. 

Even with the workmanship set aside, every sloped or flat roof can have the possibility to develop a leak. With good roofing material and proper maintenance, a flat roof can last 30 years or more before any issues like leaking begin. 

What are flat roofs called?

For commercial and industrial structures, there are five different types of a flat roof: 

  • BUR (Built-Up Roof Systems): This flat roof system has been in used for over one hundred years and is referred to as a tar and gravel roof. This flat roof material is a system of layering asphalt paper with hot liquid tar to reach a specific thickness. 
  • Metal Panel Roof Systems: Metal Panel Roof system is used for a low slope roofing applications and is common on factory and warehouse structures.  The panels span between flat roofing boards referred to as  rafters up to four feet and can hold the weight of a human. Sealed between the seams and overlapped joint for water protection and bolts have neoprene washers for sealant. 
  • Modified Bitumen Membranes: The Modified Bitumen Membrane flat roof system began being used in American in the 1970s. This two ply membrane consists of asphalt-covered reinforced fabrics with added modifiers  for the elastic property that keeps it flexible. There are two type of this membrane: APP Polymer and SBS. 
  • Single-Ply Membrane: The last three are a single ply flat roof membrane available in a EPDM, PVC, or TPO in wide sheets from the factory that is installed to the roof with an adhesive.

What is the best material for a flat roof?

There are several factors that are considered in deciding which flat roof material is used for a commercial structure.  The customer’s budget, the climate, and the age of the existing roof as well as any local building codes. 

The most popular of flat roof materials is PVC roofing, a preferred choice for clients for the cost, even though initial install is more money, the longevity pays for itself over time.  It is preferred by many contractors for the ease of installing the material.  

flat black roof

How long do flat roofs last?

A commercial flat roof that is installed correctly by a professional and has proper maintenance and upkeep by the building owner can last up to 40 years. The type of material used, and the climate can affect this lifespan, and in some areas, with lack of maintenance and upkeep, could last as little as 10 years. 

A new flat roof with overhang is recommended and in some building codes, required. With a professionally installed flat roofing material, the waterproof surface encourage rain to enter the gutters and the flat roof overhang sends the water directly to the drainage system. Key to keeping your flat roof looking good and lasting up to 40 years is keeping those drains clear so the water can flow as intended. Call (856) 662-1382 today for your flat roof replacement needs in Berlin and Cherry Hill, NJ.

What is the Best Roof Coating?

roof coating

How Long Do Roof Coatings Last?

Are you wondering if you need a presentable roof coating installation? Furthermore, are you interested in finding out how long roof coatings last? If so, it will be important to delve into some research. Roof coatings are reputed to last anywhere between ten and twenty years. Furthermore, if you schedule routine maintenance and repairs on an annual basis, you will experience great dividends in the future. 

Does Roof Coating Stop Leaks?

If you have a roof leak, you will want it to be repaired as soon as possible. One of the possible fixes is a roof coating. However, before you apply the roof coating, all the parts of the surrounding roof must be repaired with the correct methods and materials. After the roof has been thoroughly cleaned and patched, a roof coating does an excellent job of supplying a seamless protective membrane over the impacted area. The best individuals to contact for such an operation are professional roofers. A good roofing contractor will be able to diagnose the leak and act according to roofing-industry methods.

What is the Best Roof Coating?

Are you wondering what the best roof coating is? If so, some preliminary market research will yield results in this endeavor. Please read through the following shortlist to discover more.

  • GacoRoof Silicone Roofing Sealant.
  • The Eterna-Kote 100% Silicone Roofing Sealant.
  • The Henry 287 Solar-Flex White Acrylic Roofing Sealant.
  • The Kool Seal 100% Silicone Roofing Sealant.

If you would like to ask a qualified roofing professional more questions, please be sure to use your Google search option to search for a professional roofing company in your area.

How Do You Apply Silicone Roof Coating?

Are you wondering how silicone roof coating is applied? If so, reviewing this roofing procedure will be pertinent. One of the reasons while silicone roof coatings are popular is due to the fact that they have premier UV protection and a firm resilience to ponding water. Silicone roof coatings also offer strong protection from erosion, eroding slower than other roof coatings. They are more pliant, and less brittle and hard after a prolonged period of time.

How Do You Apply Roof Coating?

The first and most important part of applying a new roof coating is thoroughly cleaning the perimeter of the roof. After every single nook and cranny of the roof has been cleaned with a power washer, the flashing can be replaced. If there are any roof leaks or punctures in the roof, they can be fixed at this time. After that, your team of skilled professional roofers will apply the roof coating according to the correct installation methods.

What is Gaco Roof Coating

Gaco roofing coating is a product from the Gaco brand. It is a 100% silicone roof coating that is recommended in the roofing industry market. Whether or not you should use this coating is up to the roofing professional you are working with. The procedures for installing a roof costing are important and should be applied in a consistent manner.

How to Roof Coating

The reason why you should hire a professional roofing company is that a professional roofing contractor will do every single roof repair or installation correctly. That means cleaning the roof of your commercial property with effective tools. Powerwashing is very effective, as is the proper chemicals for the mixture. The tools will also need to be in good shape. 

When to Apply Roof Coating

Are you in the middle of winter and want to apply a roof coating? If so, you will unfortunately out of luck. That’s because roof coatings are best applied in light and sunny weather. It should be warm but not too hot. Spring and fall are great seasons out of the year to invest in a new roof coating for your commercial property.

roof coatings

Is Roof Coating Any Good

Roof coatings are fantastic for commercial flat roofs and for metal roofs. A well-applied roof coating can save your roof from a lot of troubles while you are in between roofs. Examples of weather that will regularly impact roof systems include hail, frost, extremely hot and extremely cold temperatures, and the damaging impact of ultra-violet rays. Over the years, even the most steadfast roof needs some maintenance and repairs. Roof coatings can seal punctures, create a seamless membrane, and help protect your roof when you are experiencing issues with the weather in your area. Your local roofing professional will be able to let you know which kind of roof coating is best for your building based upon the conditions of your climate.

When you need a high-quality roof coating in Berlin and Cherry Hill, NJ, you can always reach out to experts in a pinch. Please feel free to call us at our phone number, (856) 662-1382.

What is the Best Rubber Roof Coating?

What is the Best Rubber Roof Coating?

Are you wondering what the best RV roof coating is during the year 2020? Many RV owners desire this knowledge, and with good reason. Roofs take a lot of damage over the years, and it’s always best to be proactive in protecting one of your chief investments. Please review the following list of recommended products to learn more.

  • Heng’s Rubber Roof Coating
  • Kool Seal Coatings Elastomeric Roof Coating
  • Liquid Rubber RV Roof Coating/Sealant
  • Flex Seal Liquid Rubber in a Can
  • KST Coatings KST0063300-20 White Roof Coat

In order to find out whether any or all of these roof coatings would be good for you, please speak with a professional roofer. Applying a new roof coating properly is more problematic than you would think. A professional roofing project manager will have the answers you are looking for.

white rubber roof coating

Will Elastomeric Roof Coating Stop Leaks?

Are you wondering whether or not an elastomeric roof coating will stop leaks in your home? Elastomeric roof coatings come with a bevy of remarkable advantages, including waterproofing abilities. It is essential to remember, however, that elastomeric roof coatings are only as strong as the roof that they are applied to. This means that before an elastomeric roof coating is applied, the roof will need to be thoroughly cleaned and repaired. Then, and only then, can a proper elastomeric roof coating be applied. Elastomeric roof coatings can extend the current life of your roof by more than a few years. To get a proper review of the condition of your roof, please be sure to reach out to a professional roofing contractor.

How Long Does Elastomeric Roof Coating Last?

If you are new to elastomeric roof coatings, it will be vital for you to understand how long they will last and whether or not you will need to schedule a roof replacement in the near future. Elastomeric roof coatings can last anywhere from between ten to twenty years. However, this estimate is heavily dependent on how much weathering your roof receives, and how thick the coating is that is applied. 

How Do You Coat a Rubber Roof?

White rubberized coatings are an exceptional choice when it comes to rubber roofing options. That is because white is a highly reflective color, and will absorb less heat during the summer than darker colors. With regard to how you are supposed to coat a rubber roof, it’s important to first consult the professionals. A professional roofing company will have all the tools and materials to make it happen both fast and well. If you are not familiar with rubber roof work, it will always be best to call a professional roofing company in your area.

Can You Coat a Rubber Roof?

If you have an EPDM rubber roof, it is not necessary for you to coat it. This is because an EPDM rubber roof sheet is supposedly quite durable. These roofing materials boast a number of great advantages, including being quite resilient in abhorrent weather. If you believe that you need an extra layer of reinforcement, you can certainly coat your rubber roof.

White Rubber Roof Coating

There are many white rubber roof coatings on the market, as mentioned previously. However, you may not understand which one will be best for your roofing needs. In order to understand how much roofing product you will need, please be sure to call up your local professional roofing company. After all, when white rubber roofs are applied correctly, they are able to expand and contract according to the prevailing temperature extremes. This means that whenever summer is in full swing, your roof will perform well despite the severe heat and that in winter, your roof will be resilient against cold and snow.  

White Rubber Roof Coating for RV

If you need a new white rubber roof coating for your RV, you may want to choose Heng’s Rubber Roof Coating. This is because it is highly recommended on multiple RV roof coating sites. This particular coating stands up to weather elements and is non-toxic.

White Liquid Rubber Roof Coating

When you are selecting a white liquid rubber roof coating, you will want to select one that is designed to seal and waterproof roofs, and all the areas of your roof that you will want to cover. The thickness of your white liquid rubber roof coatings will also be an important consideration due to the fact that thickness will mean increased roof protection.

white rubber roof coating

White Rubber Roof Sealant

Before you schedule your new roof coating application, it’s a good idea to ascertain the current condition of your roof. Scheduling annual roof inspections will go a long way to determining your best course of action.

If you would like to discuss your needs pertaining to a white rubber roof coating in Berlin and Cherry Hill, NJ, please be sure to contact us at our phone number, (856) 662-1382.

Should I Repair or Replace Gutters?

A Gutter is Fastened to a Board.

Should I repair or replace gutters?

Are your gutters leaking? Or have they stopped draining and protecting your roof? If you’re having problems with your gutters, will it just need a gutter repair or will you have to replace the whole system? Home maintenance can mean unwanted expenses, and gutters are no exception. When you have issues with your gutters, you’ll have to decide whether it just needs a repair or whether it needs to be replaced. If there are just a few damaged sections, a few missing fasteners, or a few minor fissures, you probably won’t need to tear off all your gutters and replace them.

You should consider replacing your gutters if you are having to make repairs frequently or are experiencing frequent problems with leaks or clogging. If sections of your gutters are detached or have begun to sag, replacement is usually the best option. Sometimes this means the fascia boards where the gutters are attached might need to be replaced too, especially if they are rotting or the gutters have pulled away and damaged the boards. Whenever you need gutter repair and replacement in Berlin and Cherry Hill, NJ, look to the trusted professionals at Airborne Roofing for expert service. Call us at (856) 662-1382 to set up a service appointment.

Can you replace a section of gutter?

If you only have one or two damaged sections of gutter, usually you can just get away with a simple gutter repair and replace just those damaged sections. The damaged sections can be cut away from the good sections of the gutter with a hacksaw and new sections put in their place. The new sections are usually easy to install. All you need are fasteners and caulk to secure the sections into place.

Is standing water normal in gutters?

Given that the gutters’ purpose is to divert water from your roof and house, water should never stay in the gutter. If water is standing in the gutter, you probably have a serious clog that needs to be cleared. You may also need gutter repair to ensure your gutters are diverting water properly. Otherwise, standing water will eventually overflow and cause problems ranging from gutter leaks to basement flooding and foundation damage.

Why is water dripping between gutter and fascia?

If you notice water dripping between your gutter and fascia, flashing was probably not installed on the back of the gutter. You can remedy this with a simple gutter repair by installing a gutter apron. This flashing can be purchased at hardware stores and comes in 10-foot sections. The apron goes under the shingles and over the gutter.  

How do you repair damaged gutters?

Gutter repair usually means fixing leaks. Most leaks occur in the joints and seams and can be repaired simply by following these steps:

  • Remove all debris and flush the gutter with a hose. Before starting the repair, let the gutter dry.
  • To make the repair on aluminum or vinyl gutters, you’ll need a flexible, water-resistant sealant.
  • While applying steady pressure, force the sealant into the joint.
  • Firmly press the materials together and then clamp them so they’ll stay together while the sealant dries.
  • Let the sealant dry for 24 hours.

How to repair gutter on mobile home

Making a gutter repair on a mobile home is no different from a repair on a house. You can repair leaks, for instance, using a flexible, water-resistant sealant or with various patches. Other repairs may require putting in new fasteners or hangers or cutting away damaged sections and replacing them with new sections.

Gutter repair and cleaning

One of the keys to avoiding a major gutter repair is keeping the gutter cleaned. Gutters get clogged with everything from leaves to twigs to dirt and other debris, including ice. Clean your gutters at least twice per year or more often if you have several trees near your roof or live in an area where frequent freezes cause ice to block up the gutter.

Gutter repair and painting

If you are painting your home you might want to consider painting your gutters to match the new color. For the most part, this is OK to do, especially if you have aluminum gutters and use the right type of paint. When painting your gutters, you’ll want to start with a clear acrylic bonding primer instead of a latex primer with ammonia in it. Ammonia can react with aluminum and cause bubbles to form under the paint. You can, however, use latex paints once the primer is applied. Although you can paint vinyl gutters, it’s not recommended you do so because vinyl gutters aren’t designed to be painted. If you do decide to paint vinyl gutters, consult with a paint professional to find out which primer and paint are best to use.  

A Roofer Repairs a Downspout.

Who does gutter repair

If you notice your gutters are damaged or leaking and need expert gutter repair in Berlin and Cherry Hill, NJ, look to the trusted professionals at Airborne Roofing. We offer a wide range of solutions for your gutters. Give us a call at (856) 662-1382 to schedule an appointment for an estimate.

What Is Fibered Aluminum Roof Coating?

Contractors Apply a Roof Coating.

What is fibered aluminum roof coating?

When you’re looking to restore your roof, you have plenty of options open to you including fibered aluminum coatings. These particular coatings are composed of asphalt, aluminum, moisture scavengers, fillers, and hydrocarbon solvents. The fiber-reinforced material—usually fiberglass—is very durable, highly reflective, and capable of providing extensive UV protection. Though the fibers create lower elasticity, limiting how much they can bend or stretch, they give the coating greater strength so it resists breaking from flexing or stretching. Like other coatings, it can seal small leaks and will keep your building cool, improving overall energy efficiency. It also extends the life of your roof and can be reapplied about every five to seven years for further protection. If you are a building manager in need of a roof restoration solution, let the professionals at Airborne Roofing apply a fibered aluminum coating in Berlin and Cherry Hill, NJ. You can find out about this or any of our other services by calling (856) 662-1382.

How long does aluminum roof coating last?

Although fibered aluminum roof coatings are durable and provide good UV protection, you’ll need to be prepared to recoat fairly frequently. These coatings last anywhere between three to seven years before a new coat will need to be added.

Does aluminum roof coating stop leaks?

One reason roof coatings of any kind are applied is because they seal over pinhole leaks and cracks. Fibered aluminum coating is no exception. While roof coatings seal over small leaks, if you have several leaks or other major damage, you’ll want to make repairs before having a coating applied to your roof. 

Is aluminum roof coating waterproof?

Some will claim fibered aluminum coatings have no waterproofing capabilities. This simply isn’t true. That said, however, their waterproofing capabilities aren’t as effective as elastomeric coatings. Aluminum coatings are much more valued for their UV protection than for being waterproof. These coatings will keep your roof and building much cooler than other coatings and slow down the sun’s most damaging effects. When applied to metal roofs, it also prevents rust.

Fibered aluminum roof coating on metal roof

Aluminum roof coatings are highly recommended for metal roofs. That’s because these coatings are particularly effective at fighting rust. 

How long does aluminum roof coating take to dry?

Like other roof coatings, fibered aluminum coatings can take anywhere from eight to 24 hours to completely dry. Much of this will depend on the weather conditions. If there is dew or high humidity, it will take much longer for the coating to dry than it would in warm, dry weather. It’s also ideal to apply the coating in warmer and drier weather, so you’ll want to keep your forecast in mind when applying the coating. You want to have at least three days available of relatively warm and dry weather because it takes about three days to complete the application process and allow the coating to dry. Ideally, temperatures should be somewhere between 60 and 100 degrees with low humidity. Excessive moisture causes the finish to be splotchy and inconsistent. Extreme heat can also prevent the coating from drying correctly.

How to apply fibered aluminum roof coating

The roof coating process is actually fairly simple and non-intrusive. You won’t have to shut down business operations for the application. The application process goes as follows:

  • Clear the roof of dirt and debris. While some dirt and debris can be swept away, you might need to pressure wash areas where it’s really thick or difficult to sweep. You’ll also want to sweep again after any repairs are made, as dust and dirt affect the coating’s adhesiveness.
  • Once the roof is cleaned, you need to inspect it for any damages. Look for cracks at the seams, especially on flat roofs, as this is most likely where leaks will occur. Repair any major damage.
  • The coating has to be mixed to the right consistency for it to be effective.
  • After the coating is mixed, it is either brushed, sprayed, or rolled on.
  • The coating must be allowed to dry thoroughly before any touch-up work is performed.

Can you paint over aluminum roof coating

Because fibered aluminum coatings leave a silvery finish on your roof, you might consider painting over it. While it can be done, the results will probably not be what you want because other materials, even other roof coatings, do not adhere well to aluminum coatings.

Fibered aluminum roof coating vs elastomeric

Why would you pick a fibered aluminum coating over elastomeric? This will depend on the coating’s purpose. In general, both types of coatings will seal over cracks and small leaks, and offer UV protection that will improve energy efficiency. If your primary concern is waterproofing, an elastomeric coating like silicone will be the most effective. Aluminum coatings have some waterproofing capabilities but are generally preferred for their UV protection capabilities. You’ll see marked differences in your building’s temperature and improved overall energy efficiency with aluminum coatings. Aluminum coatings are also recommended for metal roofs because they prevent rust very well. If you are ready to restore your roof with a fibered aluminum coating in Berlin and Cherry Hill, NJ, turn to the professionals at Airborne Roofing. If you prefer an elastomeric coating, we can also help you with that. Learn about all our roofing solutions by calling (856) 662-1382.

Does roof coating stop leaks?

roof with leaks and spotting

Leaking from your roof?

If you own a commercial structure, you’ve probably had a roofing salesperson try to sell you roof coating. If they are really informed about the product they sell, they could tell you about it, the pros and cons, and more.  If they leave you and you’re still asking, “What does roof coating do?”, then they didn’t do their job. So, we’ll tell you:

Roof coating is typically formulated with a top level of top-quality resin that provides your commercial structure roofing from the sun’s UV rays, excessive water, and high winds. Because roof coating is an elastic type material, it moves with the building as it contracts and expands, protecting the roof from leaks, if it is maintained properly.

Is roof coating waterproof?

A roof coating is a fully adhered, fluid membrane, monolithic, that will provide waterproofing for the substrates. We do not recommend it as a waterproofing material for surfaces that will have heavy traffic like foot traffic on patios, sundecks, walkways, or any type of vehicle traffic.

You can use roof coating to stop leaks of minor size, but proper and professional roof coating and repair should be done as soon as possible to keep the leak from starting again and getting bigger. A roof coating should not be used to find leak nor expected to seal leaks long-term.

Are roof coatings any good?

If you are trying to decide which is best for your commercial building, roof coating vs replacement, let’s discuss roof coating benefits that you can expect: 

  1. A Cooler Building: A white or reflective roof coating reflects the sun’s rays instead of absorbing them, which keeps the building cooler and keeping your utility bills lower.
  2. Energy Consumption Reduced: A cooler building and lower energy bills are the benefits you’ll see as the owner of a commercial building. With a roof coating, you’ll reduce your carbon footprint, a bonus for the environment we live in.
  3. Energy Star Rating Increases: A commercial building’s Energy Star rating can change with the structure’s changes. A roof coating is a simple way to increase your building energy efficiency, which can increase it Energy Star rating.
  4. Improved Green Reputation: Because roof coating will make your building more energy efficient will prove to your associates, customers, and vendors that your company is making efforts to go green for the environment. This will help strengthen your reputation in the community and industry.
  5. Roof Leak Protection: Adding a roof coating will give it an extra layer that protects it from leaks. A roof coating can prevent mildew and mold damage too.
  6. Lifespan Extended: A roof coat gives your current roof an extension on life. After a professionally apply roof coating, your roof will give you many more years of life expectancy before you’ll need to consider replacing it. 

There are many different types of roof coating and each one offers many benefits. Do your research, get quotes from several roofing contractors, and ask about the different types, choosing the one that is best for your building’s roof.

roof that is prepared for roof coating

How do I prepare my roof for coating? 

Examine the roof surface for blisters, cracks, exposed foam, ponding, tears, splitting seams. If there a roof coating applied already, evaluate its condition, paying attention in particular to areas where there are roof penetrations like pipes, skylights, and vents. Check for ponding areas and cracks. 

If there are issue with the roof or existing roof coating, these should be repaired before new roof coating is applied. Existing roof coating will need to be removed before applying new roof coating in most cases because two coatings may not adhere well. 

How do you apply roof coating?

Applying an elastomeric cool roof coating is easy, but to get the best results, there are special skills required and preparation of the roofing surface. Typically, roof coating is applied during warm weather and it can get hot while working on the roof. Make sure you have eye and hand protection, and a safety belt while on the roof.

  • After the roof has dried, the sealant has set, spread the roof coating with a heavy duty paint roller that is 9-inch wide and ½-inch round on a 6 foot extension pool.
  • Apply a thick topcoat of 10 mils.
  • Apply additional coats in ponding and scupper areas for additional protection.
  • We recommend Two coats. Wait, a full 24 hours or longer before applying the second coat.

Roof coating and roof replacement are both an expense that no building owner wants to deal with, but they are necessary. Choose the right roof coating for your building and then follow through with the maintenance and upkeep, as necessary. Routine monthly inspections by the owner or maintenance team is recommended and annual inspection by a professional commercial roofing contractor can find minor issues before they become a bigger and more expensive issue. Call (856) 662-1382 today to get started on your roof coating in Berlin and Cherry Hill, NJ.

How do you repair a flat roof?

flat roof repair

Flat Roofing Services and More

It’s raining! It’s pouring! The flat roof is leaking! As an owner or manager of a commercial building, the last thing you want to find out is the roof has a leak. You’re probably asking, “Why is my flat roof leaking?”, and in this piece today, we will talk about that and some other issues about flat roof repair.

What To Do With Your Flat Roof

Most commercial structures have a flat roof and for several reasons, like installing the HVAC system on the roof, more usable square footage inside the building, and flat roof repairs are easier than on a pitched roof.

This doesn’t mean they are beyond having issues though. Like any roofing style, a flat roof will have leaks, and there are three prime causes. Depending on the damage from these potential cause, the roofing contractor will advise if flat roof repair or replace is the better choice. The three probable causes are:

  • PONDING WATER: Ponding water on a flat roof is when water remains on a roof (after a rain) for more than 48 hours. A flat roof isn’t flat, they have some slope toward drains. If the drains become clogged, that water has nowhere to go, and that creates ponding. A monthly inspection is recommended just for that purpose – checking, draining, and ponding. If clogged drains are caught in time minimizes flat roof repair needs.
  • DAMAGED MEMBRANE: Flat roofs use to be constructed as built-up roofing, where multiple layers are used that include asphalt, tar, gravel, and roofing felt. While this type of flat roofing was effective, it took longer to install, and that made it more expensive. Today, a flat roof membrane has become the preferred choice. It is 3 ply thinner material that is more durable and flexible, which makes installation easier and less expensive, yet more effective than the old built-up style.
  • Still, this membrane is susceptible to blistering, cracking, and punctures which make the insulation vulnerable to getting wet, and once it is wet, it isn’t effective and other leaks form. This is another reason a flat roof needs monthly inspection to check for the blisters, cracks, and punctures. Getting flat roof repair as soon as possible, minimizes roof leaks.
  • PENETRATING STRUCTURES: Flat roofs and slope roof both have penetrations with the HVAC, pipes, and vents.  These areas are vulnerable to leaking. There are a variety of tactics used to prevent this, such as boots, collars, flashing, and wraps. However, these can become vulnerable after exposure to the climate and elements. If a monthly inspection is missed, or the inspection doesn’t find one of these in need of replacement, you can expect a flat roof repair.

Do flat roofs always leak?

When you have leakingflat roof, repair in rain isn’t something you want to do, so the best thing to do is take preventive measure so that you don’t have a flat roof repair to deal with in the rain. While a flat roof is unique and has some significant benefits, it takes some maintenance to keep it healthy and leak-free.

The reasons that may cause a flat roof to leak could be any of the following:

  • Alligatoring–When a flat roof is built using asphalt, as its ages, it loses its elasticity then bubbles and cracks, looking like alligator skin. When a flat roof membrane gets to this point, flat roof repair isn’t possible.
  • Leaking & moisture – Moisture that is left to linger on a flat roof is one of the most common causes of leaks. The moisture sits and seeps through the membrane, if there are any bubbles or cracks, it has easy access. Once the moisture is under the membrane, it will begin to leak. If this isn’t caught early enough, not only is fungus and mold possible, but the damage caused may make a flat roof repair impossible, leaving you to get a total roof replacement.
  • Buckling Membrane – Flat asphalt roofs and slope roofs are constructed similarly in they both use a membrane that has been soaked in asphalt. It is then laid on the building top in one piece on a commercial structure. Over time, the building will shift with the ground, the roof will contract and expand, and that can cause buckling in the membrane.  That buckling allows moisture under the membrane, then the damage can be extensive enough flat roof repair isn’t possible.
  • Missing Flashing – Flat roof contract and expand with the temperature and weather. The metal flashing used on the roofing edge and penetrations can loosen with that movement.  This leaves a vulnerable area for moisture to enter and begin damage that goes beyond flat roof repair.

How do you stop a flat roof from leaking?

Whether you are the owner of a commercial building or the maintenance manager, you need to find and keep a product on hand when flat roof repair for those rainy days. You can find flat roof repair coating to apply for a temporarily stop a leak at any hardware store.

flat roof repair

What is the best material for a flat roof? and What is the life expectancy of a flat roof?

The four most popular choices and their life expectancy are:  

  • PVC Roofing – The most expensive but the benefits outweigh the cost with the durability and a life span of 20 years.  
  • Metal Roofing – This material has a long lifespan of 20 to 30 years, longest of all the flat roof materials and is the most durable.
  • TPO – With heat welded seams, this material is less likely to leak and has a lifespan of 10 to 20 years.
  • Modified Bitumen – The budget friendly flat roof material with the shortest lifespan of 10 to 15 years.

Final Thoughts

Flat roof repair isn’t something any commercial building owner wants to deal with, and with proper inspection and maintenance, the chance of leaks if minimal.

Can gutters be repaired?

seamless gutters along a roof

Do gutters go behind drip edge?

Gutters on a home are more than for looks, they serve a purpose, a particularly useful purpose. When they’re broken or damaged though, they can do more harm than good. This is why it is important to do regular inspection of gutter, repair, and cleaning too. This keeps them in good working order and keeps them looking good on your home.  Gutter repair isn’t difficult, it is just a matter of getting it done.

Yes, gutters should be installed behind the drip edge so when water runs off the roof and over the drip edge, it goes directly into the gutter system. The gutters need to have the right pitch as well to drain effectively, and the high side furthest away from the downspout so that it is all downhill. Often, a gutter repair will include adjusting the pitch and downhill slope.

A professional gutter installation is typically pitched one-fourth inch over 10-foot length and how they are attached is dependent on the gutter type.  of gutter. For instance, the fascia is the mounting area for the brackets of half-round gutters, whereas K-style gutters can be screwed to the fascia, which is a stronger method. Some gutters are strapped to the roof if there isn’t any fascia board present.

Why does water leak behind my gutters?

Water dripping behind gutters is often indication that they were not installed with flashing on the backside of the gutters. You can call a professional to fix this, or this can be a gutter repair you do yourself by installing a gutter apron, which is a piece of flashing bent so that it can be tucked up under the shingles then over the gutter system.

Once you have the apron in place, use sheet metal screws to fasten it. If your roof has a drip edge at the fascia, and the gutter is installed below that, tuck rolled up flashing under the drip edge so that is over the top of the gutter. If the gutters are steel, use steel flashing not aluminum to keep the aluminum from corroding.

How do I stop my gutters from leaking?

There are four problem homeowners could have with their gutter system:

  • Old Gutters: The older gutters get, the more likely they are to have leaks. You can keep them clean, do gutter repairs all along, but eventually, they get old and simply need to be replaced.
  • Incorrectly Sloped Gutters: A slope is needed for gutters to work effectively by directing water runoff toward the downspout. When the slope is inaccurate, the water sits inside the gutter run and begins rusting through the seams. A regular inspection and maintenance will allow you to check that slope and make corrections as necessary.
  • Loosened Gutters: Over time, gutters may pull away from your home, creating what may appear to be a leak. Usually, this gutter repair is nothing more than fastening the gutter to the fascia.
  • Gutters Clogged:
  • Many homeowners have had gutter guards added to their gutter system. It keeps them from getting clogged, which minimizes the amount of gutter repair jobs. Another option is keeping a steady routine of gutter cleaning and maintenance that will keep any clogs cleared from your gutters.

When these gutter repair isn’t done to correct these problems, the water damage they can cause can get expensive. Fortunately, even the modest DIY homeowner, this is an easy gutter repair:  

Usually it is at the section joints that are leaking, and if you have galvanized steel gutters, if you haven’t kept them clean, the clogs will leave water standing in them, causing them to rust. With aluminum gutters, the seams can begin leaking if the gutters have shifted and came loose.

To do a gutter repair, make sure any standing water is out and the gutters have completely dried. Apply gutter caulking or silicone on the seams, inside and out.  If there are rusted holes, using a putting knife, spread the gutter caulking around the hole. If the hole is large, us sheet metal to make patches, applying with the gutter caulk or silicone, then allow to dry.  This needs to be done on a day there is no rain in the forecast.

Can you replace a section of gutter?

If one or several sections are leaking or loosened, you may wonder which is better, gutter repair vs replacement. In some cases, though, gutter repair is possible by replacing a section or even several. You can get your gutter repair and completed and back to doing what they were meant to do: channeling the water out and away.

When your home needs gutter repair, you don’t want to ignore it. The gutter system on your home prevents damage to the foundation, landscaping, and siding, all of which can be costly to repair. This is why is experts stress maintaining a routine of inspection, cleaning, and making any gutter repair needed.

seamless gutters along your roof

Do roofers repair gutters?

Most roofing contractors can provide gutter cleaning and gutter repair along with roofing jobs, or in addition to roofing. If you don’t have a reliable and trusted gutter specialist or roofing contractor that can provide your home gutter repair and maintenance, doing an internet search for “gutter repair close to me”.  Call three or four and get quotes and information from each, comparing them to each other.

The gutter system on your home is important for your home on many levels, as we’ve mentioned in the article. Do your regular inspections. Follow up the cleaning, maintenance, gutter repair as needed. Protecting the most expensive investment you have is the job of gutters. Dial (856) 662-1382 today for your gutter repair in Berlin and Cherry Hill, NJ.

Which windows are best for a home?

windows in a kitchen

What kind of windows are there?

Spring has sprung out and another cold winter is almost another memory. One of those memories has been the expensive heating bills! Experts say one of the biggest leaks of heat is through the window. If your home has windows that are older than 10 years, you’re probably losing around 35% of your heat around your home windows and doors. It may be time to consider getting window replacement this spring.

A home with windows allows air and natural light in while keeping your home dry. They can define your’ home’s style. The eight different styles of for a home are:

  • Double-Hung: The most popular for window replacement, there are two sashes that slide up and down vertically in the frame. They open from bottom or top, but remain inside the frame, remaining flush to the exterior and interior. While not as easily available today, there are single-hung windows that have the same appearance and operation.  
  • Casement: These windows are hinged and open outward by a turn of a crank.
  • Awning: This style of window is hinged at the top and opens outward, allowing air in from the bottom, left or right. They pair this type of home windows installation with an operating or stationary window, above, below or alongside.

  • Picture: This is a large stationary window that allows the full light and provides a full view of the outdoor. Some people refer to this type of window as a Christmas Tree window.
  • Transom: They would find this type of window above a door, used to let more air and light inside a room, or it may be non-operating and simply used for letting in additional light only.  
  • Slider: This window glides along a track horizontally over the other window next to it. 
  • Stationary: They can customize these windows at almost any angle or shape and do not open. 
  • Bay: A bay window gives a room more interior space as it protrudes out on the exterior of the house.

Are wood or vinyl windows better?

Any type of window replacement can make a dramatic change in your home, including energy efficiency improvement, updating the appearance, and adding value. The benefits of window replacement are many, which is why it is vitally important to choose the window type that will best fit your home and your personal needs.

Today, when it comes to energy-efficient, wood windows best vinyl windows today with the new Fibrex exterior available by some manufactures. This new “wood” is maintenance-free like vinyl, but they are more expensive.

The final decision is the homeowners. When the budget is the priority, vinyl is the least expensive. If resale value, added beauty, and longevity are your priorities, then wood windows are the better choice window replacement.

open window

What is the difference between single and double-hung windows?

Choosing the style for your window replacement should be done with a lot of though.  This will reflect your style, but it is a curb appeal improvement and affects the overall feel and look of your home, both inside and out.

You need to answer these questions when choosing your window replacements:

  • Is easy to open and close important to you?
  • For your style of housekeeping around your home, windows cleaning is important?
  • Is blocking air and wind important to you?

With double-hung windows, both sashes move up and down, making window cleaning easier. With single hung windows, only the bottom sash is moveable, allowing more able to incorporate a decorative touch.

What is the advantage of double-hung windows?

Are you considering home windows installation for your home? Ask anyone in the construction, remodeling, or real estate industry if double-hung windows are worthwhile, and you’ll get a resounding yes!  Today, they are the most common and popular style of window replacement on the market and after you review these benefits, you’ll see why:  

  • Easy Cleaning: Double-hung windows were developed to make cleaning easier, with both sashes tilting inward. This enables you to clean the exterior side of the windows while inside. Gone are the days setting up a sweatshop with ladders or scaffolding and using long-handled tools.
  • Energy Efficient: Window replacement with double-hung windows, the biggest advantage is the energy efficiency they offer. Cooling and heating costs are drastically reduced, and they increase the comfort level in your home.
  • Cooling Options: For a home that doesn’t have central air and heat, window replacement with double-hung windows work great for window AC units. The sashes moving up and down make it easy to install a window air conditioner and still safely secure the window.
  • Airflow: With the sashes on double-hung windows both moving up and down, installing screens on the exterior allows you to open the window from the bottom or the top, controlling fresh airflow into your home.
  • Versatility: Double-hung windows are offer versatile styles for window replacement. They come in different colors, materials, sizes, and styles.

Hands-down, double-hung windows are the big winner if you’re considering window replacement for your home. Like anything, there are different levels of quality you can choose from, like high-efficiency glass and premium materials. Call (856) 662-1382 today for your window replacement in Berlin and Cherry Hill, NJ.

Are Fiberglass shingles better?

shingle roofing system in grey

Is there fiberglass in asphalt shingles?

Let’s start off this article by answering a basic question: “What are fiberglass shingles made of?” to which the ingredient answer is woven fiberglass base mat, waterproof asphalt coating, and ceramic granules. Fiberglass shingles are made from a woven fiberglass base mat is covered with an asphalt coating that is waterproof, and then ceramic granule top that composition which protects the shingles from the harmful UV rays of the sun. Because of how the fiberglass mat is made, it needs less asphalt for durability and strength for fiberglass shingles.

Inexpensive to produce and comparatively easy to install, asphalt shingles are widely available and a popular choice in the roofing material. Besides being the least expensive, easier to install, but their lifespan put them right up there with other roofing materials. There are two different types of asphalt shingles: fiberglass shingles and organic shingles.

  • They make fiberglass shingles starting with a base mat made of fiberglass. Then a coating of waterproof asphalt is applied, followed by a layer ceramic granule that protects the fiberglass shingles from the sun’s UV rays. This requires less asphalt because of the fiberglass mat, making it more durable and stronger. It also makes it lightweight and thinner. Fiberglass shingles have a high fire rating and usually a longer warranty.
  • They make organic shingles with asphalt-saturated recycled layer felt paper, the layer of asphalt-saturated is for waterproofing. Then a layer of adhesive asphalt is applied as a coating, and then a layer of ceramic granules is entrenched. These are heavier shingles because they apply 40 percent additional asphalt compared to the fiberglass shingles. This makes them heavier, thicker and more expensive. However, they are more flexible and rugged, but they also absorb more moisture, causing them to warp and they are not considered environmentally friendly because of the additional asphalt. 
A multi siding house with fiberglass shingles

Is fiberglass roofing any good?

Most homeowners that start shopping for roof shingles aren’t sure what type to get. They see the asphalt fiberglass shingles or asphalt organic shingles, then there are ceramic, metal, and wood shingles. This makes them wonder are fiberglass shingles better than the others, and what are the pros for fiberglass shingles vs asphalt shingles, or are there any?

 The Pros of Fiberglass Roof Shingles  

  • Lighter weight – this makes fiberglass shingles thinner and easier to install, which contractors prefer because they get your job done in just a few hours and move on to the next one.
  • Fire protection – Fiberglass shingles are placed at a high fire rating, which insurance companies love.
  • Less expensive – Fiberglass shingles are inexpensive because of the lighter weight means they used fewer materials in manufacturing.
  • Environmentally friendly – because there is less asphalt in the manufacturing of fiberglass shingles, they are more friendly for the environment.

As good as fiberglass shingles are for roofing, there are some cons to them as well:

  • Durability – Because fiberglass shingles have less asphalt, so they aren’t as heavy and rugged, they have a shorter lifespan.
  • Cold Climate – Fiberglass shingles are not recommended for houses in cold climates because they break and crack too easily when frozen. 

How long do fiberglass shingles last?

Fiberglass shingles’ life expectancy is between 25 years and 50 years. Traditional asphalt shingles have a life expectancy of fifteen years. The higher the quality of fiberglass shingles you purchase, the longer the life expectancy is guaranteed by the manufacturer.

However, whatever life expectancy they offer, there are factors that can affect that timeframe. Starting with the climate, environmental exposure, and homeowner inspection and maintenance routine. Fiberglass shingles or any roofing material will not last as long as guaranteed if it is neglected.  Routine inspections allow the opportunity to find issues and possible problems, get them addressed, and that extends the life expectancy.

Are heavier shingles better?

No, they are not.  Years ago, manufacturers would use a high-grade asphalt on top and bottom of their asphalt shingles, thinking thicker would be heavier and better. After years of research, they found that the asphalt on the bottom was not effective.

So, they began using less filler and a higher quality of limestone, resulting in better severe weather protection for homeowners. Today’s fiberglass shingles installation is less expensive compared to installing those older style shingles, making fiberglass shingles the preferred choice by homeowners. 

Choose the Best Shingle You Can Afford

You may have to go a bit out of your comfort zone to get a better grade of roofing material, with fiberglass shingles, you can choose from different grades and different brands. Shop around, compare the materials and shop the contractors, comparing the prices. Your home is an important investment, and the roofing material you choose is an important part of that investment. Call (856) 662-1382 today for installation of fiberglass shingles in Berlin and Cherry Hill, NJ from Airborne Roofing.